Charging the Lightbug Pro is a simple as charging your mobile phone.
1. Attach the Lightbug Pro to the magnetic charge cable or place it into the charging dock.
2. Plug the cable into a USB port or connect it to a wall adapter to plug it into a plug socket.
Note: It is advisable to use an adapter plugged into a power socket rather than using a computer USB port or similar.
3. The tracker will confirm that the charger is connected with a sound and the LEDs on the Lightbug Pro will blink to indicate how much it has charged, it works like a power bank.
Example: If the first 2 lights are on and the 3rd is blinking it means the battery is charging and the status of the charge is between 50% and 75%.
4. Once the device is fully charged, the LEDs will turn off (approximate charging time: 5 hours).
Hint: Our tracker support Quick Charging! With Quick Charge you can fully charge a depleted Pro tracker in just 2.5 hours.
If you have any additional questions about charging your Lightbug Pro, don't be afraid to reach out to us!